Specifications
AS3000B Microscope Stage for upright microscopes
Back to the site Home Page
Back to "About Autoscan Systems"
Back to the Main Autoscan Systems Page
SPECIFICATIONS FOR OUR AS3000B 3-AXIS MOTOR-DRIVEN
MICROSCOPE STAGES FOR UPRIGHT MICROSCOPES
The Autoscan AS3000B microscope stage is our time-proven standard stage. It
features superior mechanical accuracy, stability and general performance.
Instead of using a stepper motor to achieve focus drive, the AS3000 uses
dc motors with optical encoders on all three axes. In combination with
the EL300 electronic controller, this stage achieves outstanding motion
control. It is the finest microscope stage in the world, and incorporates
integral focus. The EL300 electronic controller comes with a universal
power supply, which will automatically adapt to ac supply voltages between
85 to 264 Volts and a range of supply frequencies from 47 to 400 Hz. Where possible, we supply electrical plugs which match those in use in our client countries. We use the information shown in a table on the website of Korjo Pty. Ltd., a major manufacturer of adapter plugs and other travel products. Please check out the table shown under "Adapter Guide" at http://www.korjo.com and let us know if there are any inaccuracies for your area.
Please contact us for details of our other stage models.
General Stage Data
- Dimensions :
-
340 mm wide x 210 mm deep x 70 mm high
- Weight :
-
3.5 kg
- Drive configuration :
-
Micrometer screw drives and multiple linear crossed roller slides
with precision ground hardened steel races
- Mounting :
-
Can be fitted to ZEISS, LEITZ/LEICA, NIKON and OLYMPUS microscopes
- Operating voltage :
-
Motors : 12 Volt
Electronics : 5 Volt
- Limit switches :
-
All axes equipped with microswitch cut-outs
- Manual drive :
-
All axes can be driven manually if required
- Recommended controller :
-
EL300
- Recommended joystick :
-
JS300
X (left/right) and Y (front/rear) Movement :
- Motor type :
-
Ironless rotor dc motor
- Position sensing :
-
Optical encoder / full PID control
- Movement range :
-
75 mm (X axis) 50 mm (Y axis)
- Speed range :
-
In joystick mode : 0 to 20 mm/sec
In computer mode : 20 mm/sec
- Positioning resolution :
-
0.25 um
- Positioning accuracy :
-
0.50 um
- Positioning repeatability :
-
+/- 2.0 um
Z (up/down, focus) Movement :
- Motor type :
-
Ironless rotor dc motor
- Position sensing :
-
Optical encoder / full PID control
- Movement range :
-
3 mm
- Speed range :
-
In joystick mode : 0 to 1000 um/sec
In computer mode : 1000 um/sec
- Positioning resolution :
-
0.025 um per step (finer steps on request)
- Positioning accuracy :
-
+/- 0.1 um
- Positioning repeatability :
-
+/- 0.2 um
Contact Details
Autoscan Systems Pty. Ltd.
| Street Address : |
Unit 56, 15 Cochranes Road, Moorabbin 3189 |
| Postal Address : |
PO Box 112, Ormond 3204 Victoria Australia |
Mobile Phone : |
+61 (0)417 358 751 |
| Email : |
|
| Geographic coordinates : |
Lat. 37 deg. 52 min. South, Long. 145 deg. 01 min. East |
| Melway streetmap reference : |
77 K7 |
Webmaster (Mike Krochmal VK3KRO) : |
|
| NEW URL ! : |
http://www.autoscan.com.au/ |
This page developed and best viewed under Netscape 4.72 or later
Back to the site Home Page
Back to the main Autoscan Systems Page